Published by Tekmetric
Subscribe
The Repair Order

/

Technician Life & Careers

Technician Life & Careers

Measuring Technician Efficiency Without Breaking Trust in the Bay

Words

Benjamin Johnson

Measuring Technician Efficiency Without Breaking Trust in the Bay

Efficiency, productivity, and proficiency all come off the same timecard, but they answer three distinct questions about technician performance. Auto repair shops that track all three know whether a slow week was caused by a technician, dispatch, parts orders, or a combination of all three.

‍

Good technicians treat performance tracking as coaching and improve over time. And that is one major difference between top-performing shops and ones with empty bays.

‍

The work technicians perform also has changed substantially in the past few years. Advanced driver-assistance calibrations appeared on less than 1% of repairable appraisals in 2017 and  accounted for more than 23% of work by 2025, according to CCC Intelligent Solutions, a leader in the auto claims and collision repair industry. It represents just one of the technological changes technicians face as they try to succeed at auto repair shops. 

‍

Here is how to measure performance in a way technicians will trust.

What is technician efficiency, and how is it different from productivity?

Most shops use these words interchangeably. That is where the trust problem starts. If a technician cannot explain the formula behind their own performance number, the number reads as a judgment instead of a measurement.

‍

Here is what each one actually measures.

‍

Productivity is the number of hours worked divided by hours available. A technician that clocked in for 40 hours but only had cars in the bay for 26 of them is running at 65% productivity. That is a scheduling issue, not a problem with technician performance.

‍

Efficiency is the number of billed hours divided by hours worked. This allows shop owners to evaluate technician performance. Three billed hours completed in two hours is 150% efficiency on that job.

‍

Proficiency is the number of billed hours divided by hours available. What did a technician produce across the whole week, start to finish? This metric combines the other two and it is the closest thing to a single honest number.

‍

Read together, these three tell you something a single number never will. A technician at 130% efficiency and 60% productivity is not a problem employee. That points to a dispatch problem, a parts problem, or a scheduling problem, and those issues belong to management.

Shop owners usually want a target number, but it is worth noting most trace back to dealership service management guidance, which was built around a different work mix. That makes your own work history the better yardstick. Compare a technician against their previous 12 months of work for a more accurate assessment of their performance.

Efficiency is mostly in the technician's control and productivity is mostly yours.

Why do technicians distrust performance metrics?

Post a whiteboard in the bay ranking technicians by billed hours, and the incentives go sideways fast. The quick diagnostic tech starts steering around hard jobs. The A-tech stops walking over to help the apprentice. Returned vehicles are quietly re-repaired off the clock because nobody wants their name next to one.

‍

In this case, the numbers are not the problem; the setting is.

WrenchWay and the National Institute for Automotive Service Excellence
(ASE) asked 5,511 technicians whether they would recommend this career to someone else. Far more said no than yes, and the gap has widened sharply in each of the past three years, with automotive technicians more sour on the trade than the field as a whole.

The rest of the survey shows where the frustration points:

  • A staggering 77% do not believe the industry is improving
  • Only 44% feel valued and respected by management
  • Only 33% say management communicates well
  • Only 26% see a clear career path where they work

A technician who already believes management does not communicate well is not going to read a productivity report as coaching. They will read it as the paperwork that precedes a pay cut.

‍

In its State of the Global Workplace report, Gallup found that managers account for roughly 70% of the variance in team engagement, meaning the metrics used to measure technician performance do not build or break trust. The person delivering it does.

Where time breaks down

Here is the objection every technician will raise, and it is a legitimate one: the standard shop owners are measuring them against was not written for the work they are actually doing.

‍

Flat rate was built roughly a century ago to standardize the cost of repairs that were largely mechanical and largely predictable. The work rolling into bays today is different than it was even five years ago. The average U.S. light vehicle hit a record 12.9 years old in the Auto Care Association's 2027 Factbook. Older vehicles bring intermittent electrical faults, corroded fasteners, and diagnostic work that does not follow a script.

‍

Then, there is calibration. Advanced driver-assistance systems have moved from novelty to routine. CCC Intelligent Solutions reports that calibrations appeared on 0.9% of repairable appraisals in 2017 and on more than 23% by 2025, with average calibration fees nearly doubling in five years to about $500.

‍

That work is coming whether shops plan for it or not. CCC points to NHTSA's rule requiring automatic emergency braking on all new passenger cars and light trucks by September 2029, which means calibration-heavy vehicles will keep aging out of warranty and into aftermarket bays.

‍

The emergence of electric vehicles also contributes to the changing nature of work that auto repair shops must incorporate. EVs made up about 2.54% of vehicles on the road by the first quarter of 2026, according to the Alliance for Automotive Innovation. That number is expected to grow.

‍

The point is not that book time is worthless — it is that a technician measured strictly on beating book time will avoid exactly the work that is growing fastest. Diagnostics and calibration punish the scoreboard. Brake jobs reward it.

‍

If you have not priced diagnostic time honestly, you have no business measuring efficiency. Fix the pricing first.

How should a shop measure technicians fairly?

Here are five practices that separate measurement that motivates from measurement that alienates.

‍

Publish the formula before you publish the score. Write down which of the three ratios you use, what counts as available hours, and how lunch, training, and shop cleanup are treated. A technician should be able to easily calculate their own number.

‍

Separate what the technician controls from what you control. Track efficiency and productivity as two different lines. When productivity dips, the first conversation is with the service advisor and the parts counter, not the technician. Shops that skip this step teach their best people that the scoreboard is rigged.

‍

Measure quality and speed. A returned vehicle generates nothing. If your only metric rewards speed, you are paying for rush jobs and absorbing the cost of rework. Additionally, this impacts the customer experience.

‍

Carve out diagnostics and calibration. Bill this work by the hour rather than against book time, and leave additional hours out of the efficiency calculation. Otherwise, the math punishes the technician for doing the job right. An intermittent electrical fault that the labor guide calls one hour can honestly take three, and the technician who chases it down lands under 35% efficiency for the effort. Do that twice and your best diagnostic tech learns to let someone else take those cars.

‍

Use the numbers in weekly touchbases. A weekly conversation about one technician's performance does more than a public ranking on a board ever will. Rankings create competition for the easy jobs. Coaching creates capability.

Does technician pay have to change, too?

Often, yes, and technicians are telling us what they want.

‍

In the 2026 WrenchWay and ASE Voice of Technician survey, 41% of technicians said they want an hourly or salary base paired with a production bonus. A year earlier, that number was 25%. 

‍

Read that shift carefully. Technicians are not asking to stop being measured. They are asking for a floor under the measurement. Paying nothing for the hours a technician spends waiting on your parts order is the fastest way to convince a good technician that the scoreboard exists to protect you, not them.

Frequently asked questions

What is a good technician efficiency percentage? There is no verified industry standard for aftermarket repair shops. The round numbers that circulate online generally trace to dealership service management guidance, where the work mix differs, or to marketing content with no survey behind it. Evaluating technician performance against the past 12 months is a more useful benchmark than any outside average because it accounts for your car count, your labor guide, and your parts supply.

‍

What is the difference between billed hours and actual hours? Billed hours are the labor hours a repair order charges the customer, set by the labor guide. Actual hours are the clock hours the technician spent on the job. Efficiency is the number of billed hours divided by hours worked. A technician who completes a three-hour job in two hours is running 150% efficiency on that job.

‍

Should technicians see their own efficiency numbers? Yes, and they should see them before anyone else does. A number a technician can check, question, and correct is a coaching tool. A number that appears in a meeting without warning is a disciplinary document.

‍

How do you measure diagnostic work fairly? Track it separately from book-time production and price it as its own billable service. Diagnostic time does not conform to labor guide estimates, and measuring it against them pushes technicians away from the work.

‍

Does flat-rate pay hurt technician retention? Survey data shows technicians increasingly prefer a base-plus-bonus structure over straight flat rate. In the 2026 Voice of Technician survey from WrenchWay and ASE, 41% chose hourly or salary plus a production bonus, compared with a quarter choosing straight hourly or salary. The issue is less flat rate itself than income volatility caused by factors technicians cannot control.

‍

How many technicians does the industry need each year? TechForce Foundation's 2026 Technician Supply, Demand, and Opportunity Report projects 70,865 annual automotive technician openings against 50,085 in annual supply, leaving a gap of 20,780 per year.

‍

Sources

  1. WrenchWay and ASE, "2026 Voice of Technician Report," fielded Nov. 10 to Dec. 22, 2025, 5,511 respondents. https://wrenchway.com/resources/2026-voice-of-technician-survey-report/
  2. Gallup, "State of the Global Workplace: 2024 Report." https://www.gallup.com/workplace/659279/global-engagement-falls-second-time-2009.aspx
  3. Shop Owner Magazine, "Is Flat Rate That Bad?" https://www.shopownermag.com/is-flat-rate-that-bad/
  4. Auto Care Association, 2027 Auto Care Factbook, released June 11, 2026. https://www.autocare.org/data-and-information/market-research/Auto-Care-Factbook
  5. CCC Intelligent Solutions, "The Current State of Calibrations: A Turning Point for Collision Repair," 2025. https://www.cccis.com/news-and-insights/posts/the-current-state-of-calibrations-a-turning-point-for-collision-repair
  6. MEMA Aftermarket Suppliers ADAS aftermarket report, 2025. https://www.mema.org/news/mema-aftermarket-suppliers-releases-new-report-growing-adas-aftermarket
  7. Alliance for Automotive Innovation, "Get Connected" electric vehicle report, Q1 2026 and full-year 2025 data. https://www.autosinnovate.org/posts/press-release/2025-q4-get-connected-press-release
  8. WrenchWay, 2024 technician survey pay preference data. https://wrenchway.com/blog/2024-technician-mechanic-stats-recruiting-job-satisfaction-pay-and-more/
  9. Ratchet+Wrench, "The SOP: What's the Best and Most Effective Pay Plan for Technicians?" January 2024. https://www.ratchetandwrench.com/running-a-shop/operations/article/33016639/
  10. Gonzalez v. Downtown LA Motors, California Court of Appeal, 2013; California Supreme Court review denied July 2013. Analysis: https://ogletree.com/insights-resources/blog-posts/california-piece-rate-employees-entitled-to-compensation-for-each-hour-worked/
  11. Ninth Circuit piece-rate compensation ruling, August 2025. https://hrwatchdog.calchamber.com/2025/08/ninth-circuit-validates-employers-piece-rate-compensation-plan/
  12. TechForce Foundation, "Technician Supply, Demand and Opportunity Report," 2026 edition. https://techforce.org/supplydemand/
  13. U.S. Bureau of Labor Statistics, Occupational Outlook Handbook, Automotive Service Technicians and Mechanics, May 2024 wage data. https://www.bls.gov/ooh/installation-maintenance-and-repair/automotive-service-technicians-and-mechanics.htm
  14. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2024, SOC 49-3023 industry profile. https://www.bls.gov/oes/2024/may/oes493023.htm

‍

FILED UNDER

Technician Life & Careers

THE PEOPLE BEHIND THE STORY

Benjamin Johnson

The Repair Order covers the work, the business and the people of independent auto repair. Published by Tekmetric.

Keep reading

All stories →