Shop Operations

Walk into your parts room and pick up the first thing you see on the shelf. If you cannot say what vehicle it was ordered for, who ordered it, or when, you are holding money that has stopped working for you.
Say the back shelf holds $2,000 in parts that have not moved in a year. That is $2,000 you already paid your supplier, and it is not helping your business do anything useful. And if the part is an electronic module or a sensor for a model your shop no longer sees much of, it might never leave the shelf.
Most shops in this business do not run a warehouse. You order parts per repair order, same day, from suppliers within a few miles. That is exactly why dead stock hides so well. It never shows up as a wasted line item.
This is a consistent issue. In a survey of 500 repair shops fielded in December 2025, market research firm IMR Inc. asked owners to name their biggest challenges heading into 2026. Finding affordable parts and dealing with rising prices came in first, cited by almost half, some 46%, of shops. Roughly half the shops surveyed named parts costs as an issue before they named anything else. Another 22.8% said they are affected by parts shortages and have trouble receiving the parts they need.
Parts issues beat out the technician shortage as a top issue affecting shops, which was reported by 23.8% of shops. That is a real shift. For most of the past decade, staffing challenges led every list.
There are three main forces behind the parts problems.
First, price. The U.S. Bureau of Labor Statistics tracks what parts manufacturers charge through its Producer Price Index. Prices for motor vehicle parts manufacturing rose 2.2% in 2025, and 4.4% across the three years ending in December 2025. That is the wholesale side of the ledger, before your supplier's margin and before your markup.
Second, trade policy. A U.S. Federal Register notice published in April 2025 put a 25% tariff on certain imported automobile parts, effective May 2025. U.S. Customs and Border Protection issued implementing guidance to the trade on May 1, 2025; a separate action extended a 25% duty to medium and heavy-duty vehicles and specified parts effective November 2025. The list of affected parts changes each quarter through a review process, which means a component that was not covered last quarter can be covered this one.
Third, complexity. S&P Global Mobility reported in May 2025 that the average age of a light vehicle in the United States reached a record 12.8 years, with about 289 million vehicles on the road. Passenger cars now average 14.5 years.
An older, larger, more varied fleet is good news for your car count, but it is hard news for your parts room. More vehicles in service means more part numbers per job and the more chances that the correct part is two counties away.
There is no credible public figure for what share of a mechanical repair shop's inventory goes dead. Dealership parts departments have benchmarks because manufacturers track them. Nondealership shops do not. If you have seen a confident percentage quoted somewhere, ask where it came from.
What is well established is the cost of carrying inventory. The Institute for Supply Management, the professional body for supply chain practitioners, has published that carrying cost commonly runs between 20% and 30% of inventory cost per year, while noting plainly that there are no consensus benchmarks for the measure. The Association for Supply Management puts the working range at 15% to 25%. Those figures come from across all industries, not from auto repair specifically, so treat them as a frame rather than a number to put on your profit and loss statement.
Carrying a part that’s unused creates several issues:
Now, run it on your own shelf. Say you have $2,000 in parts that have not moved in a year. At 25%, a rate that falls inside both published ranges, that costs you about $500 a year. You never see that money leave the building. And it is on top of the $2,000 you cannot spend on anything else.
Do the same math on a $10,000 parts room. That is roughly $2,500 a year, which is about the same amount as a technician's tooling budget. The parts sitting in your inventory impact your bottom line in ways you don’t see or realize.
None of what follows is new. These are standard inventory control methods that supply chain professionals have taught for decades, codified in the APICS Dictionary published by the Association for Supply Chain Management. They scale down to a parts room with 200 line items just as well as they scale up to an entire distribution center.
Sort your parts by what they actually cost you. ABC analysis applies the Pareto principle to inventory. Rank every part you stock by annual dollar usage, which is unit cost multiplied by the number of units you go through in a year. The top group, your A items, will typically be a small share of your part numbers and a large share of your dollars. Those get tight control, frequent counts, and carefully set reorder points. Your C items, the cheap high-volume stuff like clips, filters, and bulk fluids, get loose control because the cost of managing them closely exceeds what you would save.
Set a floor and a ceiling for everything you stock. Set a floor and a ceiling for everything you stock. Min-max is as simple as it sounds. The minimum is the count that tells you to reorder. The maximum is the count you reorder back up to. Setting the minimum means answering two questions: how many of these do you use in a week, and how many days does it take your supplier to get you more. Multiply weekly usage by supplier lead time in weeks, then add a cushion for the weeks when demand spikes or the truck is late. That cushion is your safety stock.
Count a little, constantly, instead of everything, once. Cycle counting is an inventory accuracy technique where you count on a rotating schedule rather than shutting down for an annual inventory count. The APICS Dictionary defines it that way, and it pairs naturally with ABC analysis: count your A items monthly, your B items quarterly, and your C items once or twice a year. Ten minutes on a Tuesday morning beats a Saturday with the doors closed, and it catches a bad count while the paperwork is still fresh enough to explain.
Add one rule that is not in any textbook: Any part that has not moved in 12 months gets a decision, not another year of quiet storage. Return it if the window is open. Sell it at cost to a shop that sees more of that platform. Use it on the next applicable job even if the margin is thin. The worst outcome is the one where you do nothing because doing nothing still costs you money every month.
Sourcing resilience means you can get the right part. It is not about stocking more. It is about having more ways to receive parts.
Know your suppliers' actual delivery cutoffs, not the ones on the website. A supplier who can get you a part by 2 p.m. is worth more on a same-day job than one whose price is $8 better but whose truck comes the next day.
Track your own fill experience by supplier. For 30 days, note on each repair order which supplier you called first and whether they had it. At the end of the month, you will know who actually supplies your business in a timely fashion.
Price delays, not just parts. If saving $40 on a part means a car sits in a bay overnight, you have traded $40 for billable hours. Ask your service advisers to schedule repairs that also fit parts ordering timelines.
Be honest with customers about the difference. When a part is genuinely two days out, communicate that to the customer. A customer who is not informed their vehicle isn’t going to be returned for days is a bad review waiting to happen. Your advisers cannot manage that conversation if the parts status lives in one person's head.
Pick one afternoon this month. Walk into the parts room with a clipboard and put every item into one of three buckets: moved in the last 90 days, moved in the last year, has not moved in a year. Add up the dollar value of that third bucket. Then take a quarter of that number. For instance, if the third bucket comes to $6,000, you are paying about $1,500 a year in rent on it, and the $6,000 itself is doing nothing.
How do I know if a part on my shelf is dead stock? Use time, not judgment. Any part that has not been used or sold in 12 months gets a decision: return it, sell it, use it, or write it off. There is no public benchmark for what percentage of a shop's inventory should be dead, so the only useful measure is movement inside your own four walls.
What is a good inventory turn rate for a repair shop? No industry association publishes one for nondealership shops. The commonly quoted target of six to eight turns a year comes from dealership parts department data. Track your own turn rate over a year and improve against yourself rather than against a number borrowed from a different business model.
Should I stock more parts to protect against shortages and tariffs? Not broadly. Stocking deeper on your true A items, the parts you use constantly and know you will sell, can make sense when lead times stretch. Stocking broadly across parts you use twice a year converts a supply problem into a carrying cost problem. Published carrying cost ranges run roughly 15% to 30% of inventory value a year across industries.
How do I set a reorder point? Take how many of the parts you use in a week, multiply it by how many weeks your supplier takes to deliver, then add a cushion for demand spikes and late trucks. Write that number on the bin as the minimum, and write the highest quantity you want on hand as the maximum.
Are core charges taxable? It depends on the state. California's tax agency, for instance, publishes guidance requiring that the core credit be subtracted before tax is calculated and that the shop refund the tax reimbursement tied to the deposit when the core is returned. Other states treat it differently. Ask your accountant about your state specifically.
FILED UNDER
Shop Operations
THE PEOPLE BEHIND THE STORY